The Perfect Compromise

 
 

HINO EXPANDS HYBRID ELECTRIC RANGE

If you’re not keen on going the full electric route, but are looking for operational savings, then Hino has the answer you may be looking for – both in fuel consumption and servicing costs….

Hino Australia’s customers now have even more choice with a range of Hybrid Electric Built to Go products available in Hino dealerships from July 2023.
 
“Rising fuel prices and an increased focus from customers wanting to minimise their environmental impact has seen sales of Australia’s only Hybrid Electric light-duty truck soar,” said Daniel Petrovski, Department Manager – Product Strategy for Hino Australia. “The introduction of the new Alloy Tray and TradeAce Built to Go models to our Hybrid Electric range offers customers a high quality, cost effective and versatile drive-away solution that can reduce business operating costs from day one.


“Not only do our Hybrid Electric models meet Euro 6 exhaust emissions standards, but recent real-world trials comparing the proven Hino Hybrid Electric truck against a traditional diesel equivalent revealed a 22% reduction in fuel use and CO2 emissions.”

Even greater savings are achievable depending on the application of the vehicle and how it is driven.
 
Hybrid Electric customers also benefit from a reduction in maintenance costs as the electric motor replaces the diesel engine’s starter motor and alternator, and the regenerative braking reduces the use of service brakes and increases the life of the brakes, all while charging the Hybrid batteries.
 
“It is possible for Hino 300 Series Hybrid customers to reduce yearly maintenance costs by up to 16%,” said Daniel.
 
The Hino 300 Series Built to Go Hybrid Electric TradeAce models are fitted with a Hino Genuine aluminium tray, ladder racks and a Hino Genuine premium Bullbar (Wide Cab) or nudge bar (Standard Cab).
 
The 300 Series Alloy Tray range features the same base aluminium tray body specification as the TradeAce models but without the ladder racks and nudge/bull bar.
 
The 300 Series Hybrid Electric Built to Go range includes the 616 Standard and Wide Cab 4.5 tonne GVM car-licenced models through to the 716 Wide Cab with a 6.5 tonne GVM.  
 
The Hybrid system uses a lightweight Power Control Unit (PCU) that encompasses the battery, inverter, Engine Control Unit (ECU) and DC-DC Converter 
 
The Hino N04C-WR four cylinder common-rail injected turbo-diesel engine produces 150hp (110kW) and 470Nm of torque, which is delivered in combination with the electric motor, with maximum torque available at a very low 1200rpm. Because maximum torque is available at such low rpm, fuel use is minimised.
 
The six-speed automated transmission with the electric drive motor directly coupled to it results in quicker gear shifts and smoother take-offs.
 
“The new Hybrid Electric Built to Go models will be of particular appeal to tradespeople and small business operators who are seeking a versatile drive-away solution that can reduce operating costs from day one,” continued Daniel Petrovski.
 
Like all Hybrid Electric models, the new Built to Go models will feature Hino SmartSafe, a comprehensive safety package with advanced driver-assist technology that takes an active focus in protecting the lives of all road users.
 
Hino SmartSafe includes a Pre-Collision System (PCS) with Autonomous Emergency Braking (AEB), Pedestrian Detection (PD) and Lane Departure Warning System (LDWS). This is in addition to Vehicle Stability Control (VSC), reverse camera, dual SRS airbags, four-wheel disc brakes UN ECE R-29 cab strength certified cab and hill start assist (easy start).
 
With over 700 Hybrid Electric trucks on the Australian roads, Hino has led the way with low-emission trucks for over 15 years. 
 
The Hino 300 Series Hybrid Electric light-duty range is driven by Toyota Group technology that is proven in millions of hybrid vehicles worldwide.
 
Like all Hino products, the 300 Series Hybrid Electric range is supported by Hino Advantage, a suite of business solutions that are designed to reduce costs over the life of the vehicle.
 
This includes 5 Years Warranty, 5 Years Roadside Assist, capped price servicing, Hino Genuine Parts, Hino finance options and customer support provisions via the Hino Customer Support Centre.
 
The Hino 300 Series Hybrid Electric is available at Hino dealerships nationwide, with more information at www.hino.com.au


Got something to say? Say it here!

truckinwithkermie.com is for YOU and about YOU. We’d love to hear your stories. There are a number of ways to get in touch with us:

kermie@truckinwithkermie.com
(+61) 0418 139 415

More From The Blog

Previous
Previous

On The Road Podcast #132

Next
Next

SEA Electric Partners with Mack (US) as a Tier 1 Supplier